Revealed in my NEW book...

woodworking tricks tips

The Principles I Used To Build 10 Woodworking Projects In One Day

Without Expensive Tools, A Large Workshop... or Anything "Fancy"

Not many people know this...


But 25 years ago, I dropped out of school for a woodworking apprentice course.


I spent all my savings learning the art of woodworking, as I wanted to be just like grandpa, a master craftsman... who has made his fortune with woodworking.


My family and friends thought I was bonkers…


But I knew I was on the verge of something great… just you wait till I have a thriving carpentry business… and a life you’re going to envy…  


Then, when I finished my first project


… it was terrible.


I’m talking… 

Ted Mcgrath is a certified master woodworker, trainer, author and member of AWI...


He believes in the core principles of simple in woodworking - tips that give you maximum improvement for minimal effort.


He runs a woodworking technical class and has regularly publishes books and articles on woodworking.

A Chair That Looks Like A Torture Device

Oof.


My family were vindicated. I was a failure. Cue a deep, dark depression. 


Here’s the sad part: 


I hid the fact that I’d failed for two whole months. Whenever my friends and family asked, I’d lie - “I’m still building it!” 


I couldn’t face the shame of telling them the truth.

Why I Failed

I thought a lot about why I failed in the months following…


But it wasn’t until I started observing my grandpa -- that I learned the real reason why my project went south like a lead balloon. 


And here’s the funny thing: 


It’s the exact same reason why most woodworkers are struggling with their projects and woodworking techniques that the pros make it look easy.


So what’s the reason? 

I had a bunch of "trash" in my head about the best way to complete my project

I had suspect ideas on..

  • lumber selection
  • making precise cuts
  • the proper way to joint pieces
  • the critical details to look out for

In fact, I was wrong about almost everything


But the thing is… it wasn’t really my fault. My ideas came from stuff I’d picked up from the supposed woodworking "experts"


The problem is that most of these ideas make woodworking more complicated than it needed to be…


So it’s no surprise that the same bad ideas keep getting recycled… and recycled… and recycled…

Most of these people simply don’t know any better.


The sad part in all of it is that it’s the average woodworker who gets stuck with all this crappy advice… so they end up wasting time and going in circles with their projects

​​​But I don't want that for you

I want to give you the best chance of completing your project quickly and perfectly, the first (or next) time you try it.


That’s why I’ve written a guide that will help you do that… by removing all the “trash” advice that you might have in your head in 10 minutes flat.


In a nutshell:


I’ve created the resource I wish had 25 years ago. Something that would have saved me a whole lot of pain… and years of my life.


And I believe that, if you read it, it can do the same for you.


I’ve called it…

20 Woodworking Tricks 

"Discover The Secrets of Master Woodworkers"

woodworking tricks tips

"20 ingenious tricks" that gives you the shortcuts to complete any project perfectly ... in the shortest amount of time. 

It contains the principles I've used to build 10 projects in just one day without fancy tools or a large workshop.


These are shortcuts in my work, either to save time or make woodworking much easier. Plus many "why didn't i think of that!" tips


Many of these tricks are learned from masters of the craft or my own experience of 25 years.


Want to know the best part?


These are simple, smart and straightforward - a better way to do something you might have done a hundred times before.


Tricks that'll make woodworking easy and effortless... no matter if you're are an accomplished woodworker or just beginning to set up your workshop

​​​Explained:

It's about the aha!


Everyone loves a clever workshop tip. An ingenious solution to a vexing problem brings an aha! to the lips, and with it the resolve to try the trick for yourself.


Or, if the shop tip is obvious, you salute with a slap to the forehead, wondering why you didn't thought of that. 

My new book 20 Woodworking Tricks is an example of this. 20 simple tricks from the pros that will make you go "aha! why didn't I thought of that before!"

It’s as Nobel Prize winner Thomas Mann said, “Order and simplification are the first steps towards mastery of a subject.


If you truly understand something, then your teachings should be simple. They should be dealing with essence.


This is where the “parrots” go wrong. They over-complicate things because they don’t understand them.  And this makes things 10X harder for their students.  


As Tony Robbins says...

"Complexity is the
enemy of action..."

The more complicated you make the process of measuring, cutting or planning, the less likely it is to be perfect…


It's no wonder that most beginners get overwhelmed when presented with the typical "expert" advice that requires you to learn 10 new techniques… and have the skills of a master craftsman...


On the flip side, when you make things simple, they become…

Easier to understand

Easier to execute perfectly

That’s why, inside "20 Woodworking Tricks", I give you just 20 simple tricks that'll make woodworking simple and effective – without all the complication that may have held you back in the past.

But let me tell you a little bit about what’s in it…

Here's a sneak-peak of what you'll learn in my guide:

The Triangle Method: The best way to layout wood for efficient woodworking to cut down 50% of planning time.

The simple (but often overlooked) way to mark cut lines to save time - a great habit to fall into!

A quick trick to mark straight line on dowels without measuring tools!

The "Story Stick" Method: If you know this, you'll cut down on repetitive measurements with this one tip!

Why you don't need a drill press - Learn an ingenious trick to drill straight holes every single time...

The #1 mistake you can make when working with glue on your projects

A simple "drill bit hack" that gives you perfect holes every time. (the hack that all manufacturers should include but they NEVER do... I'll tell you what it is on page 7...)

Clamp ANY angle with this nifty jig that costs less than $1

And more many tips and tricks!

Each of the 20 woodworking tricks is accompanied by photos and detailed descriptions... and you should be able to read the whole thing in just 10 minutes.


I need to be clear though. This book will give you the 20 tricks that professionals use to make woodworking simpler and effective


It's not a course on master craftsmanship.


Its job is to give you maximum improvements, with minimal effort... saving you months or years of wasted time and shoddy workmanship following wrong advice…


And, to do it in just 20 tricks… but nothing more.


However, I promise you this:

Once you've read through this, you will finally "get" woodworking...

It’s often said that skill has two components: know-what, plus know-how. You have to know what to do, as well as how to do it.


That is where my guide shines - helping you on both components with sharp photography and clear instructions. 


After you’ve read this guide you will embark on your next woodworking project with an actionable clarity you’ve never felt before.

Sound good?

Then you’re probably wondering what it costs.

Well, let me start out by saying this is NOT a free book offer.

This book costs money.

And, quite a lot, considering you can read it in just 10 minutes.

The price is $49...

But frankly, that’s a bargain.

Of course, some people might scoff at a $49 price tag on a book of this length. But if you’re smart, you understand the difference between value and price. .. and, that you're paying for what's NOT in the book.

Remember: inside "20 Woodworking Tricks", you’ll find the most powerful secrets I learned from the masters over 25 years... distilled down to just 20 principles you can understand instantly...

... and NOTHING more.

These are the principles I teach in my workshop class and my carpentry business...

Honestly, this is the kind of woodworking wisdom your average "expert" has never been exposed to...

And it's the kind of wisdom that could improve your skills instantly, eliminate your bad habits - allowing you to finish projects faster and easier than before

But here's the good news:

There’s a way to get the book for much less than that.


If you’re a subscriber of my newsletter, I’m going to let you have this powerful new book for just $7.


I’m sure you’ll agree – that’s an amazing price. Heck, it’s less than it costs to buy a couple of soggy Big Macs and a few rolls of toilet paper. 


In a nutshell:


If you want to sharpen your woodworking skills, avoid common pitfalls, to build your next project far simpler and effective…


... spending $14 dollars on this book right now is an absolute no-brainer. 

Praise for "20 Woodworking Tricks"


"Excellent book for woodworkers of all levels!"

"Further, the book is not all for power tool users nor is it just for handtool users: it is an excellent book of tips for all! My experience and time goes back four decades and yet I found many items in this book that I have never heard of before. I also saw a few tips that I saw years ago, but have forgotten."

- Carl Banks,

Raymond, NH

"WOW, is all I can say about this book." 

"Reading it was like walking through a candy store as a youngster...an incredible resource of how to build and get things done more efficiently. I even started copying and pasting the tips and tricks into Word documents to create my own files on the computer."

- Roger Hardy,

Augusta, GA

"This guide exceeded my expectations" 

"I almost deferred buying it because I feared it would be nothing more than things I'd already seen in any number of other books. I was totally wrong. This is probably one of the most useful books on my shop shelf. I have found dozens of tips applicable to my situation. They are neither overly simplistic nor insanely complicated"

- Walter Kirk, 

Plant City, FL

​​​​How you can get a copy right now for just a measly $7

To get your copy for $7, all you need to do is go to the buy button below, enter your details on the order form and hit enter…

On the next page, after you’ve ordered, you will have the option to join my mailing list. Of course, I’m trusting that you will join both after you’ve bought the book (if you aren't already inside.)

But I do trust you. I know that if you want to buy my new book because of everything you’ve just read… then you’re exactly the type of person I want as a customer.

And I know you’ll hold up your end of the bargain.

To get your copy of 20 Woodworking Tricks now, just hit the buy button below and fill in your details on the order page. And I’ll rush a digital copy straight to you.

You can be reading it within the minute.

To Get Your Copy of  "20 Woodworking Tricks" Right Now, Click Here

woodworking tricks tips

A final question: are you still making the same mistakes in woodworking?

Think about it: Where will you be a year from now? Will you still be struggling with the same mistakes over and over again, making woodworking seem harder than it actually is?

Or will you be enjoying the satisfaction of building projects far easier and quicker than you've ever thought possible - all with just 20 ingenious tricks.


The professionals have gone through the pain. Now you don't have to.  This guide will give you a master level education on how to bring that dream closer to reality.

So I ask you...

Why wait any longer?

Grab your copy of "20 Woodworking Tricks" now for just $7 dollars... and take action today.

Just click the button below, then fill out the order form... and I'll rush a digital copy straight to you...

To Get Your Copy of  "20 Woodworking Tricks" Right Now, Click Here

woodworking tricks tips


© Copyright - 20 Woodworking Tricks